Moneda:
USD
  • USD
  • EUR
  • GBP

huge discounts on volume

KERLINK - BAICELLS- MULTITECH-LAIRD-OTHERS

0

Water and Waste / Leak Detection

Leak rope and line sensors for pump rooms, valve vaults and pipe runs.

Polysense WxS8800 Water Leak Line Sensor Terminal, 10 m

Polysense WxS8800 Water Leak Line Sensor Termin...

Smart sensor and RTU 2-in-1 LoRaWAN terminal from the Polysense iEdge 4.0 line. Line-type water l...

Smart sensor and RTU 2-in-1 LoRaWAN terminal from the Polysense iEdge 4.0 line. Line-type water leak sensing, 10 meter cable, no positioning. It detects water along a 10 meter sensing cable and reports a leak over a LoRaWAN network. The cable detects the presence of water without locating the point of the leak. The OD outputs can switch external devices such as relays, beepers or fans when a reading or a remote command triggers them.Specifications Sensor: line-type water leak cable, 10 m, swi...

$166.18

Synetica Water Leak Detection Rope, 10 m

The Synetica Water Leak Detection Rope, 10 m is a 10 metre water-detection rope for the Synetica ...

The Synetica Water Leak Detection Rope, 10 m is a 10 metre water-detection rope for the Synetica enLink Status-L leak sensor. Laid along pipe runs, under raised floors or around equipment, it detects water contact anywhere along its full length and triggers the Status-L to send a LoRa alarm. Key specifications 10 m sensing rope — detects water along its entire length Purpose-built accessory for the Synetica enLink Status-L leak sensor Covers long pipe runs and wide areas from a single sensor...

$136.12