- USD
- EUR
- GBP
Wholesale deals: Kerlink, Baicells, Seeed WM1302
Volume pricing applies automatically in the cart
Synetica
Synetica enLink LoRaWAN sensors for air quality, gas detection, leak detection and status monitoring, with replacement gas cartridges.
Synetica SO2 Sensor 0-5ppm — LoRaWAN US915
LoRaWAN SO2 sensor — sulfur dioxide monitoring for industrial fence-line and combustion sites.Syn...
LoRaWAN SO2 sensor — sulfur dioxide monitoring for industrial fence-line and combustion sites.Synetica LoRaWAN sulfur dioxide sensor (0–5ppm range) — for industrial fence-line, combustion sites, and any application requiring SO2 monitoring. Pairs with the Synetica enLink Air-X for full multi-gas coverage.Key specifications SO2 detection, 0–5 ppm LoRaWAN US915 Outdoor IP-rated Industrial fence-line use cases Pairs with Synetica enLink Air-X
$449.00
Synetica Water Leak Detection Rope, 10 m
The Synetica Water Leak Detection Rope, 10 m is a 10 metre water-detection rope for the Synetica ...
The Synetica Water Leak Detection Rope, 10 m is a 10 metre water-detection rope for the Synetica enLink Status-L leak sensor. Laid along pipe runs, under raised floors or around equipment, it detects water contact anywhere along its full length and triggers the Status-L to send a LoRa alarm. Key specifications 10 m sensing rope — detects water along its entire length Purpose-built accessory for the Synetica enLink Status-L leak sensor Covers long pipe runs and wide areas from a single sensor...
$136.12
Synetica Ozone Cartridge, 0-2 ppm, ppb Resolution
The Synetica Ozone Cartridge, 0-2 ppm, ppb Resolution is a replaceable ozone (O₃) gas-sensing car...
The Synetica Ozone Cartridge, 0-2 ppm, ppb Resolution is a replaceable ozone (O₃) gas-sensing cartridge for Synetica enLink air-quality monitors. It provides a 0–2 ppm measurement range with ppb-level resolution for continuous ambient gas monitoring, and swaps in seconds so monitors stay in service with minimal downtime. Key specifications Pre-calibrated ozone (O₃) sensing cartridge, 0–2 ppm range Field-replaceable — swap cartridges without tools or recalibration downtime Designed for Syneti...
$567.18
Synetica Carbon Monoxide Cartridge, 0-100 ppm
The Synetica Carbon Monoxide Cartridge, 0-100 ppm is a replaceable carbon monoxide (CO) gas-sensi...
The Synetica Carbon Monoxide Cartridge, 0-100 ppm is a replaceable carbon monoxide (CO) gas-sensing cartridge for Synetica enLink air-quality monitors. It provides a 0–100 ppm measurement range for continuous ambient gas monitoring, and swaps in seconds so monitors stay in service with minimal downtime. Key specifications Pre-calibrated carbon monoxide (CO) sensing cartridge, 0–100 ppm range Field-replaceable — swap cartridges without tools or recalibration downtime Designed for Synetica enL...
$442.40
Synetica Ammonia Cartridge, 0-100 ppm
The Synetica Ammonia Cartridge, 0-100 ppm is a replaceable ammonia (NH₃) gas-sensing cartridge fo...
The Synetica Ammonia Cartridge, 0-100 ppm is a replaceable ammonia (NH₃) gas-sensing cartridge for Synetica enLink air-quality monitors. It provides a 0–100 ppm measurement range for continuous ambient gas monitoring, and swaps in seconds so monitors stay in service with minimal downtime. Key specifications Pre-calibrated ammonia (NH₃) sensing cartridge, 0–100 ppm range Field-replaceable — swap cartridges without tools or recalibration downtime Designed for Synetica enLink indoor/outdoor air...
$442.40
Synetica enLink Modbus Master Bridge, 32 Data P...
The Synetica enLink Modbus Master Bridge, 32 Data Points is a wireless Modbus master that polls u...
The Synetica enLink Modbus Master Bridge, 32 Data Points is a wireless Modbus master that polls up to 32 data points from wired Modbus RTU meters and sensors, then transmits the readings over LoRaWAN. It bridges legacy industrial equipment — energy meters, PLCs, flow computers — into modern wireless IoT deployments without trenching new cable. Key specifications Polls up to 32 Modbus RTU data points from connected slave devices LoRaWAN wireless on 868 / 915 MHz, up to +18 dBm transmit power ...
$471.90
Synetica Hydrogen Sulfide Cartridge, 0-100 ppm
The Synetica Hydrogen Sulfide Cartridge, 0-100 ppm is a replaceable hydrogen sulfide (H₂S) gas-se...
The Synetica Hydrogen Sulfide Cartridge, 0-100 ppm is a replaceable hydrogen sulfide (H₂S) gas-sensing cartridge for Synetica enLink air-quality monitors. It provides a 0–100 ppm measurement range for continuous ambient gas monitoring, and swaps in seconds so monitors stay in service with minimal downtime. Key specifications Pre-calibrated hydrogen sulfide (H₂S) sensing cartridge, 0–100 ppm range Field-replaceable — swap cartridges without tools or recalibration downtime Designed for Synetic...
$442.40
Synetica Sulfur Dioxide Cartridge, 0-50 ppm
The Synetica Sulfur Dioxide Cartridge, 0-50 ppm is a replaceable sulfur dioxide (SO₂) gas-sensing...
The Synetica Sulfur Dioxide Cartridge, 0-50 ppm is a replaceable sulfur dioxide (SO₂) gas-sensing cartridge for Synetica enLink air-quality monitors. It provides a 0–50 ppm measurement range for continuous ambient gas monitoring, and swaps in seconds so monitors stay in service with minimal downtime. Key specifications Pre-calibrated sulfur dioxide (SO₂) sensing cartridge, 0–50 ppm range Field-replaceable — swap cartridges without tools or recalibration downtime Designed for Synetica enLink ...
$442.40